Uxcell A21122200UX0370 1206 Self-Aligning Ball Bearings 30Mm Bore 62Mm Od 16Mm Thickness Double Row Open Type Chrome Steel





- Size - Model - 1206 (I.D.=30mm, O.D.=62mm, Thickness=16mm)
- Material - Rolling Balls are made of chrome steel with good surface quality, good hardness, load capacity, and wear resistance. The cage is made of stamping steel.
- Features - Double row, open type. ABEC1 accuracy, normal clearance.
- Capability - Dynamic Load Rating (Cr) - 15.6kN; Static Load Rating (Cor) - 4.65kN; It is suitable for medium radial loads and low thrust loads.
- Applications - Include office automation, film handling equipment, vertical spinning equipment, and industrial intermediate shafts, etc.
Uxcell A19031400UX0764 1200 Self Aligning Bearing 10X30X9Mm Ball Bearings 5Pcs





- 1200 (I.D. - 10mm, O.D. - 30mm, Width - 9mm)
- Dual row self aligning bearing for accommodate static and dynamic misalignment
- Self-aligning ball bearings generate less friction than any other type of rolling bearing
- Very loose conformity between balls and outer ring keeps friction and frictional heat at low levels
- Self-aligning ball bearings can reduce noise and vibration levels, for example, in fans
Sackorange UPC 2 Pack Ucp205-16 Pillow Block Mounted Ball Bearing - 1 Inch Bore - Solid Cast Iron Base - Self Aligning






- LONG-LASTING PERFORMANCE - Our 2 Pack UCP205-16 bearing is made from ultra-durable bearing steel, ensuring that it can withstand even the toughest conditions and provide long-lasting performance.
- LOWER MAINTENANCE COSTS - With our high-quality industrial bearings, you can reduce maintenance costs and downtime, saving you time and money in the long run.
- EASY INSTALLATION - These UCP205-16 Pillow Block Bearings are easy to install, making it a hassle-free process for even non-professionals.
- SELF-ALIGNMENT - Our bearings are self-aligning, which means that they can automatically adjust to any misalignment, providing better performance and longer bearing life.
- VERSATILE - With a 1 inch bore, our Steel Bearings are versatile enough to be used in a wide range of applications
Wjb 2204-2RS Self Aligning Ball Bearing

- Self-aligning bearing for applications subject to shaft deflections or misalignments between the shaft and housing
- Straight bore for fitting on a conventional cylindrical shaft
- Rubber seals on both sides of the bearing to keep lubricant in and contaminants out
- Steel cage evenly spaces balls for reduced friction, vibration, and noise
- Normal radial internal clearance for applications where thermal expansion is not a factor
Xike UCT206-20 Bore 1-1/4 Inch Pillow Block Take-Up Mounted Ball Bearings, Solid Cast Iron Base And Self Aligning Chrome Steel Sealed Bearings.






- Housing integral cast iron forged and rust-proof painted.
- Assembly of self-aligning chrome steel sealed bearings.
- Simple installation and easy maintenance lubrication system.
- Compensate shaft misalignment and strong and durable.
- Reduce costs and replacement frequency, XIKE bearings simple and efficient choice.
Wjb 2202-2RS Self Aligning Ball Bearing

- Self-aligning bearing for applications subject to shaft deflections or misalignments between the shaft and housing
- Straight bore for fitting on a conventional cylindrical shaft
- Rubber seals on both sides of the bearing to keep lubricant in and contaminants out
- Steel cage evenly spaces balls for reduced friction, vibration, and noise
- Normal radial internal clearance for applications where thermal expansion is not a factor
Wjb 2205-2RS Self Aligning Ball Bearing

- Self-aligning bearing for applications subject to shaft deflections or misalignments between the shaft and housing
- Straight bore for fitting on a conventional cylindrical shaft
- Rubber seals on both sides of the bearing to keep lubricant in and contaminants out
- Steel cage evenly spaces balls for reduced friction, vibration, and noise
- Normal radial internal clearance for applications where thermal expansion is not a factor
Ntn 1310S Bearing 1310 Double Row Self-Aligning Radial Ball Bearing

- Self-aligning bearing for applications subject to shaft deflections or misalignments between the shaft and housing
- Straight bore for fitting on a conventional cylindrical shaft
- Steel cage evenly spaces balls for reduced friction, vibration and noise
- Open bearing for lubrication applied in place
- CN (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision
Tonmp UCP BEARING 4 Pack Ucp204-12 Pillow Block Mounted Ball Bearing - 3/4 Inch Bore - Solid Cast Iron Base - Self Aligning …






- LONG-LASTING PERFORMANCE - Our 4 Pack UCP204-12 bearing is made from ultra-durable bearing steel, ensuring that it can withstand even the toughest conditions and provide long-lasting performance.
- EASY INSTALLATION - These UCP204-12 Pillow Block Bearings are easy to install, making it a hassle-free process for even non-professionals.
- LOWER MAINTENANCE COSTS - With our high-quality industrial bearings, you can reduce maintenance costs and downtime, saving you time and money in the long run.
- SELF-ALIGNMENT - Our bearings are self-aligning, which means that they can automatically adjust to any misalignment, providing better performance and longer bearing life.
- VERSATILE - With a 3/4 inch bore, our Steel Bearings are versatile enough to be used in a wide range of applications
Wjb 2201-2RS Self Aligning Ball Bearing

- Self-aligning bearing for applications subject to shaft deflections or misalignments between the shaft and housing
- Straight bore for fitting on a conventional cylindrical shaft
- Rubber seals on both sides of the bearing to keep lubricant in and contaminants out
- Steel cage evenly spaces balls for reduced friction, vibration, and noise
- Normal radial internal clearance for applications where thermal expansion is not a factor
Meskel 2205Atn Double Row Self Aligning Ball Bearing 50Mm X 25Mm X 16Mm

Uxcell A21122200UX0389 1205 Self-Aligning Ball Bearings 25Mm Bore 52Mm Od 15Mm Thickness Double Row Open Type Chrome Steel 2Pcs





- Size - Model - 1205 (I.D.=25mm, O.D.=52mm, Thickness=15mm)
- Material - Rolling Balls are made of chrome steel with good surface quality, good hardness, load capacity, and wear resistance. The cage is made of stamping steel.
- Features - Double row, open type. ABEC1 accuracy, normal clearance.
- Capability - Dynamic Load Rating (Cr) - 12kN; Static Load Rating (Cor) - 3.3kN; It is suitable for medium radial loads and low thrust loads.
- Applications - Include office automation, film handling equipment, vertical spinning equipment, and industrial intermediate shafts, etc.
Generic OUFDJ Atn 1206 Self Aligning Ball Bearing Double Row





Sackorange S-1002 2 Pack Ucfl205-16 Pillow Block Bearing, Flange Mount Ball Bearing Unit, 1 Inch Bore, 2-Bolt Flange, Self Aligning Cast Iron Housing






- LONG-LASTING PERFORMANCE - Our UCFL205-16 bearing is made from ultra-durable bearing steel, ensuring that it can withstand even the toughest conditions and provide long-lasting performance.
- LOWERS MAINTANENCE COSTS - The installed pillow bearing avoids repeated disassembly and repair of the bearing, reduces replacement frequency and maintenance costs
- DOUBLE SEALING - The pillow bearing adopts a double layer seal, which has good sealing performance and does not allow impurities and water to enter, extending its service life
- HIGH QUALITY - The pillow block bearing is made of bearing steel, which is more solid and durable, with high density, durability and long service life
- WIDELY USED - Suitable for various mechanical fields such as textiles, motors, CNC machine tools, aerospace, industry, agriculture, metallurgy, chemical engineering, etc
Fag Bearings 1303 C3FAG Self Aligning Ball Bearing


- Product type - ball bearing
- Manufactured by FAG
- Made in china
Sun-Bearings KBS 2201 2RS Self Aligning Ball Bearing

- Kbs 2201 2RS Self aligning ball bearing, Rubber sealed 12x32x14 mm
Fasna 53206U Self-Aligning Thrust Ball Bearing,Self-Aligning Pressure Bearing

- Bearing steel long life bearing, smooth, low noise.
- Self-aligning thrust ball bearing,Self-aligning pressure bearing, before use please add lubricating oil or oil
- 53206U (inner diameter = 30 mm, outer diameter = 52 mm, thickness = 20 mm).
- Straight bore for fitting on a conventional cylindrical shaft
Ntn 2205 Double Row Self-Aligning Radial Ball Bearing


- Self-aligning bearing for applications subject to shaft deflections or misalignments between the shaft and housing
- Straight bore for fitting on a conventional cylindrical shaft
- Steel cage evenly spaces balls for reduced friction, vibration and noise
- Open bearing for lubrication applied in place
- CN (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision
Harfington HTA220506HH0149 4Pcs 1096 Self-Aligning Ball Bearings 6Mm Bore 15Mm Od 5Mm Thickness Open Type Chrome Steel





- Size - Model - 1096 (Inner Diameter=6mm, Outer Diameter=15mm, Thickness=5mm)
- Material - Rolling Balls are made of chrome steel with good surface quality, good hardness, load capacity, and wear resistance. The cage is made of stamping steel.
- Features - Double row, open type. ABEC1 accuracy, normal clearance.
- Applications - Suitable for applications such as drive shafts where the shaft and housing are difficult to center and where the shaft is prone to deflection.
- Package Content - 4 x Self-Aligning Ball Bearings
Yodaoke ATN 1206 30Mm X 62Mm X 16Mm Self Aligning Ball Bearing Double Row




