Ewk EB0103 Patented 6.5L Pneumatic/Manual Oil Extractor






- Humanized Design - With EWK oil extractor for oil change pump, the engine oil or transmission fluid can be easily and cleanly extracted directly through the dipstick tube, and the sealing cap is attached to prevent the liquid from spillage during transport.
- Dual-Purpose - Equipped with pneumatic and manual mode depend on the environment and your own equipment. The manual mode requires no other equipment to use, while the pneumatic mode turns the pump into a high-speed oil changer. (Suction speed - 1.8L/minch)
- No Oil Left - The vacuum oil changer comes with 2 sizes of upgraded extra-long tubes with different diameter. Slide it as far as possible to reach the very bottom of your reservoir and suck up every drop of oil.The replacement hose (SKU - EB0278) and 3.5 x 4.5 mm super slim hose (SKU - EB0277) are available.
- Wide Application -Perfectly extracts most fluid types - engine oil, transmission fluid, coolant, and power steering fluid. Applicable for cars, motorcycles, lawnmowers, boats, jet skis, etc. *Not compatible with Mercedes W212 E350, and C218 CLS 350. *Note - Gasoline and fluids with high volatility, high corrosion, high alkalinity, and high temperature are FORBIDDEN to be used on the extractor.
- 12+6 Month - Durable products backed by an extraordinary 12+6 months warranty.
Amarine Made YI-0564 Oil Pump, Oil Extractor Pump 12V
Ranked #7 in Best Automotive Performance Oil Pumps Of 2024









- Efficient Equipment - This 12V, 8 "L x 7 inch W x 4 "H oil pump has a powerful force of 60W. Drawing 5A of current, its motor delivers 0.8-1.0 liters/min flow rate while operating steadily and silently. Its very portable and can be used anywhere without location limits, empowering convenient oil changes wherever desired.
- Easy Installation - First connect the hose's inlet and outlet to the oil inlet and outlet, and then connect the power clip with a red positive link and a black negative link to the car battery. Clamp the conductive clip, and press the button againch The control of the oil transfer pump is very simple, and you can run your engine smoothly by yourself.
- Usage Guide - Before using the oil pump extractor, you need to start the motor to warm the oil to 104F-140F. Then shut down the motor before pumping. It cannot be used for gasoline/petrol, water, gearbox oil, or flammable liquids (fuel, gasoline, etc.). Before use, please pay attention to whether the inlet and outlet directions correspond correctly to the hoses and positive and negative poles, and lock the hoses. Press the button only after all connections are installed. Do not pump out oil w
- Full Accessories - The set of Motor Oil Diesel Fluid Transfer Pump contains an 8 x 7 x 4 inch, 1 pound oil change pump along with the following accessories - a 1.5 meter outlet hose, a 1.2 meter inlet hose, 2 hose locks, and 2 battery clamps.
- Wide Application - This 12V transfer change oil pump doesnt have complex workflows, and can easily remove oil scavenged in the tube from cars, motorcycles, RVs, boats,trucks, quad bikes, and lawn equipment at any time. It is also an excellent choice for changing the oil in scooters, ships, marine trucks, tractors, truck forklifts ,and more.
Ewk EB0261 6L Vacuum Oil Extractor Pump Fluid Extractor Oil Change Pump






- Work Freely - Portable 6 liters sturdy and lightweight extractor pump for changing fluid. Simple manual operation requires no other equipment to use with. Perfect for carrying around to complete various fluid extraction jobs.
- Easy to Use - Create vacuum and powerful suction by pumping the handle, makes it quick to empty fluids in your equipment. The special extra-wide base designed allows you to step on it to stabilize the tank while pumping. Built-in capacity marker for easily tracking the progress.
- Hominization Design - The 59 inch transparent main tube makes checking oil quality easier, and the 42 inch suction probe is made of flexible metal for easily slide into the bottom of oil pan. Sealing cap to keep the tank well-sealed and safe. Pour spout makes it fluent to dump the waste fluid without spilling.
- Wide Application -Perfectly extracts most fluid types - engine oil, transmission fluid, coolant, and power steering fluid. Applicable for cars, motorcycles, lawnmowers, boats, jet skis, etc. *Not compatible with Mercedes W212 E350, and C218 CLS 350. *Note - Gasoline and fluids with high volatility, high corrosion, high alkalinity, and high temperature are FORBIDDEN to be used on the extractor.
- 12+6 Month - Durable products backed by an extraordinary 12+6 months warranty.
Four Uncles FU002A 6.5L Oil Extractor - Pneumatic/Manual Vacumm Fluid Extractor







- 2 WAY USAGE - Pneumatic and manual mode to fit any condition. The pneumatic mode provides higher speed while manual mode requires no other equipment to work with
- SPEEDY EXTRACTION - Fast extraction speed of 1.8 L /minch The oil change pump extracts engine oil in a 4 cylinder car within 5 minutes at pneumatic mode
- NO OIL LEFT - Vacuum fluid extractor comes with a main tube and 3 kinds of tubes with different diameter go into the bottom of oil pan and suck up every drop of oil. The fluid extractor can be used to remove brake fluid from brake system with additional brake bleeding hose
- Easy to Use - With FOUR UNCLES oil extractor, you dont have to get under the car anymore to do fluid changing and there is no mess to clean afterward. Just simply open the hook and insert tube to change engine oil
- WORK FREELY - Not limited to places, change oil anytime, anywhere. Good chioce for working on a car in the garage, also suitable for using outdoors on boats, truck, or lawn mowers
Harpy Eagle HE-001 Electric Oil Change Extractor Pump 12/24V 100W






- The electric oil extractor with non-slip pads comes fully assembled and ready to use straight out of the box. It includes a detailed manual and a list of 100 car models with engine oil capacity, which makes it easy for anyone to get started with confidence, even if they have no prior experience changing oil.
- Powerful Motor - The oil extractor pump has a powerful 100W motor, which allows it to pump oil up to 1 gallon per minute. We use a rotary engine that is built with high-quality, reliable metal materials and has no plastic parts, making it more efficient and durable compared to others.
- Convenient Usage - The oil change electric pump has extended hoses, each 4 feet in length, allowing you to extract oil from larger engines, such as pickups, trucks, and boats. Quick-release plugs in the kit prevent oil spillage during storage, and a special clip holds the hose in place when draining oil into a container.
- Extended Functionality - The car oil suction pump's power cable has straight construction with 59 inch. (1,5 m) length, that twice the length of the coiled cables, allowing you comfortably change oil even in pickup trucks. We've also increased the cable's cross-sectional area and clamp size for added safety.
- Storage Case - Our electronic fluid extractor comes in a compact storage case, which allows for storing the kit in one place and easy carrying. The step-by-step instruction manual is well-composed and reliable, as it is written by a certified Master ASE mechanic, and is attached inside the case, ensuring that you never lose it.
- Versatile Pump - The oil change system is also equipped to handle oil changes for the transfer case and rear axle gearbox, making it essential for vehicles lacking drain plugs. This pump can be widely used in changing oil for lawn mowers, power washers, scooters, ATVs, generators, etc.
Plumia 12V 100W Oil Change Pump Extractor
Ranked #11 in Best Automotive Performance Oil Pumps Of 2024






- If the oil cannot be pumped after the oil change pump is started, please do not start it all the time to prevent overheating from damaging the oil change pump. Please use the product according to the instructions
- SAFE OPERATION - Except for engine oil and diesel, the oil pump must not draw any flammable liquid or water to avoid accidents. Before use, be sure to heat the car engine to 104 F-140 F, Avoid clogging the oil pump due to oil solidification.
- ENGINE OIL CHANGE MADE EASY - DC 12V 100W has enough power, you only need to clamp the conductive clip on the motor and open the switch to start it, so that you can complete the oil pumping work smoothly and effectively, replacing the traditional oil change method and reduce tedious workload (diesel flow - 1.7L / m, oil flow 0.35L / m).
- ACCESSORIES & PRECAUTIONS - The oil pump has 2*outlet hose, 2*inlet hose, 4*hose locks,1*screwdriver, 1*Oil-proof gloves, 2*battery clips, 1*user's manual. Please pay attention to the direction of import and export, positive and negative poles and lock hose lock before use. The suction power of the micro suction pump is limited. Please do not connect other extension tubes.
- WARNING - This product is NOT suitable for gasoline/petrol. Do not use this pump to extract water, gearbox oil or easy flammable liquids (fuel, petrol etc) If there is any problem with this oil pump, please contact customer service in time, and you will get a satisfactory result.
Four Uncles FU-FET200 200Cc Fluid Extractor, Extraction & Fill Pump, Oil Change Syringe







- LONGER TUBES - The fluid transfer pump includes two extension hoses that can be connected for a reach of up to 23 inch and comes with tube caps that prevent fluid spillage. An additional 23 inch extension hose is included, which when connected, is sufficient to reach hard-to-reach locations
- DOUBLE-SEALED SECURITY - Oil extractor pump is made of strong and durable materials, with a double rubber ring design that creates an airtight seal, and a precision threaded design on the end of the tube that prevents any leakage
- QUICK CONNECTION - Oil syringe with a lock buckle that can be inserted and disconnected with a gentle press, convenient and fast to extract the oil. It also comes with a spare buckle for replacement when the original is loose
- PRECISE MEASUREMENT - The capacity of the oil suction pump extractor is 200 cc, monitor fluid levels accurately and know exactly when to stop pumping with the marked scale (mL & oz.) on this oil extractor pump's transparent body
- WIDE APPLICATION - Oil extractor pump suitable for various applications including boats, farm equipment, industrial gear boxes, motor bikes, and vehicles. Also ideal for brake master cylinders, oil filter housings, differentials, and gear boxes
Thorstone TFEP-02 Automotive Fluid Extractor Pump, Oil Change Syringe
Ranked #11 in Best Oil Transfer Pump Of 2024






- TRANSFER FLUID SMOOTHLY - Thorstone syringe style fluid evacuator comes with 0.24 inch OD and 0.32 inch OD extension tubes, up to 40 cm when connected, long enough to reach hard-to-reach locations for extracting and changing transmission fluid, power steering fluid, gear oil, anti-freeze and brake fluid.
- LEAK FREE FLUID EXTRACTOR - The Locking button helps to use the tube safely. This hand pressure fluid extractor and injector features a dual rubber ring design that forms an airtight seal, the precision threading at the end of tube preventing any leakage.
- MOST LIQUID REMOVAL - The extracting & filling vacuum fluid pump is designed to be chemical and oil resistant. Remove mechanical liquids on ATVs, automobiles, boats, cars, trucks, RVs, lawn mowers, golf carts and other vehicles.
- PACKAGE CONTENTS - Auto oil syringe package includes 1 transparent fluid syringe with locking adapter, 2 clear tubes with end caps for brake fluid syringe pump attachment, and 1 non-drip silicon connector for your convenience.
- 100% SALE SUPPORT - We back up all products for life, 24*7 fast response customer service free all your concerns. Sincerely thanks for your support to Thorstone!
Tce ATFE65U Torin Oil Changer Vacuum Fluid Extractor: Manual Convenient Oil Change Pump & Fluid Extractor







- Simple Operation - The manual mode of this TCE oil extractor pump is simple to operate, and does not require other equipment to work with. The tube being simply put into the desired liquid, and the fluid extractor connected, which can be operated completely by hand
- No Oil Leaks - Lightweight plastic body, translucent material of this oil extractor, very clear view of interior, integrated design to effectively avoid oil leaks when using.
- Quality Materials - The high quality nozzle head is made of nitrile rubber, which has good corrosion resistance and oil resistivity, and this oil pump extractorcan can withstand temperatures up to 175 F (80 C)
- No Waste - TCE Oil extractor pump comes with tubes which have different diameters going into the bottom of oil pan. The fluid extractor can be used to remove fluids from engine oil to brake fluids. It has a 6L reservoir, 5mm/6mm/8mm dimension tube to reach the very bottom of the reservoir and suck up every drop of oil.
- Wide Use - This oil vacuum pump extractor can be used in many ways. Not only can you pump most fluid types - engine oil, transmission fluid, gear oil, coolant, and power steering fluid, but you can also pump fish tanks and other liquids.*Note - Gasoline and fluids with high volatility, high corrosion, high alkalinity and high temperature are FORBIDDEN to be used on the oil pump extractor.
Aigmlson AG100 Aigmison 12V 100W Engine Oil Pump, Electric Oil Change Extractor Pump





- Package Included - 1 x Oil Transfer Pump; 1 x Outlet Hose(10mm); 2 x Inlet Hose(6mm,8mm) ; 2 x Hose Clamps; 2 x Battery Clamps.
- Electric Oil Pump - In low temperatures it is recommended that the engine be warmed up to 104F-140 F.Simple Connection two battery clamps directly attached to battery source,and no need specialised tools.
- Powerful Motor - The oil extractor pump has a powerful 100W motor,Made of high-quality aluminum alloy,Pure copper motor,corrosion-resistant and non-rusting, effectively preventing oil leakage or short circuit.
- Trouble Saving - Clean and Fast two clear thicker and flexible hoses can keep looking at the fluid extraction process,The length of the oil inlet pipe can be changed according to your needs, there by changing the size and speed of the liquid flow.
- Widely Use - Suitable for cars, motorcycles, boats work with diesel or engine oil ,Fits to use with diesel, engine oil.
Ewk EB0280 6.5L Manual Oil Extractor Change Pump






- Hassle-Free - Change oil without crawling under your car. No mess, no cleanup. Simply remove the dipstick and insert the tube for a seamless oil change experience.
- Simple & Secure - Change oil easily anytime, anywhere with just 10 pumps (1 s/pump), no additional equipment is needed. Transport worry-free with the attached sealing cap to prevent spills. *Note - After 30s, might need to pump again to maintain the vacuum and ensure the oil is fully drained.
- Effortless Access - Get every drop of oil with EWK's upgraded vacuum oil changer and its extra-long tubes. Simply slide it to the very bottom of your reservoir, ensuring complete suction.The replacement hose (SKU - EB0278) and 3.5 x 4.5 mm super slim hose (SKU - EB0277) are available.
- Wide Application -Perfectly extracts most fluid types - engine oil, transmission fluid, coolant, and power steering fluid. Applicable for cars, motorcycles, lawnmowers, boats, jet skis, etc. *Not compatible with Mercedes W212 E350, and C218 CLS 350. *Note - Gasoline and fluids with high volatility, high corrosion, high alkalinity, and high temperature are FORBIDDEN to be used on the extractor.
- 12+6 Month - Durable products backed by an extraordinary 12+6 months warranty.
Oemtools 24389 Manual Fluid Extractor, 5.3L Oil Extractor









- Extended Reach Hose - The updated 41 inch extended dipstick hose adapters provide a longer reach and broader applications, making it easier to access hard-to-reach fluid reservoirs in various vehicles.
- Flexible Hose Included - This automotive fluid extractor pump comes with 5 ft. of flexible hose and two dipstick hoses, allowing for versatile and precise fluid extraction from different reservoirs, ensuring complete removal.
- Leak-Proof Design - The single-piece structure features a leak-proof bottom, preventing any fluid spillage during extraction. This ensures a clean and efficient operation, perfect for any automotive maintenance.
- Overflow Prevention - Equipped with an overflow shutoff valve, this oil vacuum pump extractor prevents fluid from overflowing during use. This safety feature ensures a mess-free engine oil change process on vehicles and boats.
- Ergonomic Handle - Our oil extractor pump is designed with an oversized handle for easy use, providing a comfortable grip and making the pumping process effortless. A great addition to your collection of automotive tools.
Four Uncles FU-MOEP6 6L Manual Vacuum Oil Extractor Pump







- Work Portability - Portable 6-liter hand pump, using precision machining process, matching the hose with the tubes, light weight, easy to assemble and use. Simple to operate, suitable for carrying around to complete a variety of liquid extraction work
- Quick Extraction - Vacuum and strong suction are generated by pumping the handle, which allows rapid evacuation of liquids from the unit. Upgraded aluminum pressure release plug is more durable and efficient. Additional epuiped a replacement rubber plug
- Multipe Tubes - The 59 inch transparent main hose makes oil quality checking easier and three 41 inch extension tubes to meet different types of vehicles. Additional equipped with a 19 inch brake bleeding hose to change brake fluid
- Hominization Design - Markings on the side of the tank make it easy to record the amount of oil removed. It has a spout for easy pouring of old oil. The extra wide base makes the tank more stable
- Application - Applicable for vehicles, motorcycles, lawnmowers, boats, jet skis etc. And extract different types of liquids, like engine oil, transmission fluid, coolant and power steering fluid. Note - Gasoline and fluids with high volatility; high corrosion; high alkalinity and high temperature are FORBIDDEN to be used on the extractor
Estune ESTUNE-GALLON-5567 2 Gallon/7.5 L Manual Pneumatic Fluid Extractor, Automotive Oil Extractor Pump Oil Vacuum Changer






- 2 Ways to Extract Oil - the oil extractor supports 2 ways to refine oil, manual and automatic, the automatic vacuum mode can connect air compressor to extract oil quickly in few minutes, and manual mode simply extract the handle up and down about 11 times
- 2 Gallon Large Capacity - extra large capacity extractor with comfort handle lets you lift easily and draw low viscosity fluids such as water or coolant with ease
- No Oil Left - fast connect the 5 feet main hose to the extended PU hose and brake bleeding hose to easily insert the hose into the bottom of the gasoline; All connections are docked by sealed joints to avoid oil leakage
- Wide Applications - the fluid extractor pump can be applied in many applications, such as cars, yachts, RVs, trucks, etc.; This brake fluid extractor can quickly and easily extract oil, saving time and effort, which is a necessary tool for self help car maintenance
- Package Includes -1 x fluid extractor, 6 x tubes, 1 x user manual; Warm Reminder - Before extracting the oil, please let the engine warm up for 5 minutes to make the oil mix well, and then make sure the oil hose touches the bottom before extracting
Vevor 1.74 GALLONS FLUID EXTRACTOR 6.5L Manual Fluid Extractor Pump, Oil Changer Vacuum Fluid Extractor









- Manual Operation - This fluid extractor features a manual mode that gets the job done without any additional equipment, making it simple and convenient. Compared to the pneumatic mode, the manual mode is easier to maintain and operate, ensuring efficient performance.
- All-in-One Kit - Pop the package and find a treasure trove of tools a 1.74 Gal/6.5L tank, a main tube, a dipstick, two extension tubes, a liquid suction hose, two sealing rings, and a user manual that gets you going. This oil extractor pump handles all sorts of fluid extractions.
- Thorough Fluid Extraction - 6.5L vacuum fluid extractor comes with four sizes of suck-it-all-up oil extractor tubes, you're reaching the deepest depths, leaving tanks dry. Main Tube - 9.8 inch x 39.37 inch / 249 x 1000 mm; Extension Tube 1 - 0.28 inch x 47.24 inch / 7 x 1200 mm; Extension Tube 2 - 0.24 inch x 47.24 inch / 6 x 1200 mm; Suction Hose - 0.31 inch x 58.27 inch / 8 x 1480 mm.
- Convenient Usage - Think less, do more with our four-step fluid swap. Grab a tube, ditch the dipstick, pump it out, and pour it off. Our oil change pump is a clean, green, engine-changing dream that keeps your hands clean and your engine keen.
- Fluid Freedom - Engine oil, gear oil, power steering fluid, or brake fluid our oil pump extractor is perfect for extracting various types of liquids. Wherever you are, whatever you drive, from the car, motorcycle, or yacht to the lawnmower or tractor, we're your go-to gadget for a quick fluid flip.
Duratech 704002 6.5L Oil Extractor Pump Pneumatic/Manual







- Package Contents - DURATECH oil extractor kit comes with everything you need, including 1 x 6.5L oil extractor tank , 1 x main tube, 3 x extension tubes, 1 x brake bleeding hose, 1 x product manual, and 3 x alternate rubber rings
- Pneumatic & Manual - This oil pump extractor supports both pneumatic and manual mode oil change. The pneumatic mode requires an additional connection to an air compressor, allowing for more efficient oil changes. The manual mode does not require any other equipment, so you can change oil anytime, anywhere
- Time and Effort Saving - With the oil change pump, you no longer need to tip over the lawn mower or get underneath the vehicle to change the oil, making it easier and less laborious. In addition, this oil change pump is easy to operate, you only need to read the manual carefully to complete the oil change on your own, greatly reducing the cost of oil changes
- Upgraded Suction Tube Storage - To ensure clean storage of the oil tubes, we have upgraded the vacuum fluid extractor with two suction tube storage units. These black storage units can be assembled into a long tube fixed on the side of the suction pump through the metal ring. After using the suction hose, you can insert it into this storage units, preventing residual oil from flowing out and causing a mess
- Wide Application - Compatible with most vehicles and machinery, this oil extractor pump can efficiently and cleanly extract and replace transmission fluid, antifreeze, power steering fluid, gear oil, brake fluid, and other mechanical fluids from cars, boats, trucks, RVs, lawnmowers, and golf carts
Vevitts YZ017 Engine Oil Pump, Portable Electric Self-Priming Motor Oil Pump
Ranked #14 in Best Automotive Performance Oil Pumps Of 2024







- VEVITTS 100W OIL EXTRACTOR PUMP - Lightweight and Portable-compact size for easy storage anywhere and transport.
- BUY WITH COMFIDENCE - From the purchase of for RAW materials to the factory inspection of products, we will conduct inspections at each stage, buy with confidence.
- HIGH-QUALITY MATERIALS - Vevitts oil extractor pump is made of high-quality aluminum alloy and plastic pipes, which is corrosion-resistant, durable, wear-resistant, corrosion-resistant, and durable.
- EXCELLENT PERFORMANCE - The oil pump is used for oil extraction. This oil change equipment is perfect and the efficiency is high. The extraction can be completed by one person. It is equipped with 3 thick hoses, and the entire extraction process can be clearly seen. It is a practical and safe tool.
- EASY TO USE - Oil fluid extractor is easy to install, easy to use, small in size, light and portable, easy to store and carry to any place you want. No special tools required, needn't warm engine oil up. Just fix the two clips on the battery power supply, connect 2 inlet hoses(6mm,8mm) by adapter, fix outlet hose(10mm) on the outlet by yellow clamp, and turn the power on.
Oemtools 24938 Pneumatic/Manual Fluid Extractor, 9.5L Oil Extractor









- Dual Extraction Modes - Allows both pneumatic and manual extraction of fluids, giving you flexibility for different tasks and situations. This feature makes it perfect for professional mechanics and DIY enthusiasts who need a reliable fluid extractor.
- Leak Proof Reservoir - Features a one-piece leak proof reservoir that ensures no spills or messes during use of fluid extractor pump. This durable design provides peace of mind and keeps your workspace clean and safe.
- Versatile Hose and Adapters - Includes a 5 ft. main suction flexible hose and 2 dipstick adapters, along with updated 41 inch extended dipstick hose adapters for a longer reach and broader applications. This versatility makes it a great addition to your automotive shop equipment.
- Automatic Shutoff Valve - Our oil pump extractor is equipped with an automatic shutoff valve that prevents fluid from overflowing. Once capacity is reached, suction will stop, ensuring a hassle-free and safe extraction process.
- High Capacity and Easy Use - With a 2.5-gallon (9.5L) capacity and an oversized pumping handle, this oil extractor pump is designed for easy use and handling. It works with low viscosity fluids, including water and coolant, making it a valuable addition to your automotive tools.
Duratech DT704001 200Cc Fluid Extractor Automotive, Fluid Pump With Long Extension Tubes, Oil Syringe







- Package Contents - The DURATECH fluid extractor includes 1 x 200cc fluid pump, 2 x 12 inch extension tubes with end caps, 2 x spare rubber sealing rings, and 1 x anti-drip silicone connector
- Upgraded Extension Tubes - The suction pump includes two extension hoses with diameters of 1/4 inch and 5/16", which can be connected up to 24 inch, long enough to reach the bottom of an oil pan. Both extension hoses are equipped with end caps to prevent fluid spillage
- Double Seal Design - Our fluid extractor features strong suction power and no oil leakage. The double rubber ring design creates an airtight seal for powerful suction, and the precision threads on the end of the pump help establish a secure seal to prevent any leakage
- Quality Construction - Made of high-quality and durable PP material, the automotive syringe is solid in use. The self-locking copper connector securely holds the tube, preventing it from falling off during use. The transparent body of the suction pump has clearly marked scales to accurately monitor the fluid level
- Wide Application - Compatible with most equipment, this oil removal pump can efficiently and cleanly extract and replace transmission fluid, coolant, power steering fluid, gear oil, brake fluid, and engine oil from cars, boats, trucks, RVs, lawnmowers and golf carts
Yaegoo 64-I Dc 12V 60W Oil Change Pump Oil Diesel Fluid Pump Extractor






- Voltage - DC 12V; Wattage - 60W; Current - 5A; Max Flow Rate - Motor Oil 0.3-0.5L/min, Diesel or Heating-oil 3-5L/minch
- This oil change pump is very portable and can be used anywhere without location limits, empowering convenient oil changes wherever desired.
- The oil transfer pump set contains an 8 x 7 x 4 inch, 1 pound oil change pump along with the following accessories - a 4.92ft outlet hose, a 3.93ft inlet hose, 2 hose locks, 2 battery clamps, gloves and screwdriver.
- The Oil Change Pump Extractor can easily remove oil scavenged in the tube from cars, motorcycles, RVs, boats,trucks, quad bikes, and lawn equipment at any time.
- Note - This Oil Change Pump cannot be used for extracting water or dilatant materials. Before using the oil pump extractor, please start the motor to warm the oil to 104F-140F.