Lemotech LMUS-PLATE-220170-2P 2Pc Junction Box Mounting Plate Abs Plastic Internal Panel W/Screws For Installation On Electrical Box






- Internal mounting plate main for hinged cover junction box seriesstainless steel latch electrical box 8.7"x6.7"x4.3"; abs plastic latch electrical box 8.7"x6.7"x4.3".
- Material - ABS plastic
- Plate size(L*W) - 7.56 inchx5.55 inch
- Package info - Plate*2; M4*8 Screws*4
- Easy to secure and organize the internal components of the junction box, such as terminals, switches, or receptacles ensuring they are properly installed and maintained within the box.
Zulkit MP Junction Box Mounting Plates



- Mounting plate for junction box
- The mounting panel for easy installing PCB board, terminal or any other electrical components which need to be fixed on
- The junction box can be easily to fix on the wall with the wall brackets
Lemotech LMUS-PLATE-350250 Mounting Plate For Junction Box, Abs Plastic Internal Panel W/Screws For Installation On Electrical Box






- Internal mounting plate main for hinged cover junction box seriesstainless steel latch electrical box 13.8"x9.8"x5.9".
- Material - ABS plastic
- Plate size(L*W) - 12.2 inchx8.27 inch
- Package info - Plate*1; M5*8 Screws*4
- Easy to secure and organize the internal components of the junction box, such as terminals, switches, or receptacles ensuring they are properly installed and maintained within the box.
Vce A177B-5P Low Voltage Mounting Bracket (1 Gang, 5 Pack) For Single Gang Wall Plate







- Flush Mounting - VCE single gang low voltage mounting bracket is designed for mounting wall plates flush with the wall
- Fully adjustable - Adjusts to fit various wall thickness; The wall thickness supported by this bracket is up to 20mm(0.787in).
- Easy to install - Horizontal or vertical mounting. Installation can be finished in a few minutes. Note - the distance between the walls needs to be at least 45mm(1.77 inch)
- Wide compatibility - Great for low voltage cables(speaker wires, coaxial, HDMI and data/communication cables, banana wall plates.)
- Package contents - 5 x Single Gang Low Voltage Mounting Bracket; 18 months warranty for quality problems.
Yetlebox P15015 Waterproof Electrical Box Dustproof Junction Box Weatherproof Ip67 Abs Plastic Enclosure Switch Router Project Box With Mounting Plate






- PACKAGE - 1 x Weatherproof Junction Box, 1 x Mounting Plate, 2 x 1/2 inch NPT Cable Glands, 4 x wall brackets.
- IP67 GRADE - IP67 waterproof grade, which means dust-tight and protected from moisture challenges up to jetting water, keep all your electrical equipment Safe & Dry. It is widely used for both indoor and outdoor applications or projects.
- EASY FOR DIY - Simple hinged cover, easy open and close, This sturdy box can be drilled and shaped easily without cracking, so its also suitable for your various DIY projects.safety lockable design to prevent un-authorized openings
- DURABLE for YEARS - Made of high quality ABS plastic which has longer serve time and superior in impact resistance. Durable junction box can offer well protection for your projects in outdoor.
- SIZE - Outer Size of electrical enclosure - 5.9"x5.9"x3.5"/150x150x90mm
Vce A177BL Low Voltage Mounting Bracket Single Gang Wall Plate








- EFFORTLESS INSTALLATION - This low voltage bracket is extremely easy to install, simply cut holes in the wall according to the 4 corner hole markings, then insert the bracket and tighten the two clamping wings to complete the installation. The bracket supports horizontal or vertical mounting, easy to operate, even if you don't have professional knowledge.
- FLUSH MOUNTING AND STURDY - The bracket integrates seamlessly with your wall for a clean and tidy appearance, thanks to its flush-mount design. It is upgraded with PC material, which is more durable and not easy to deform, ensuring long-lasting use.
- WIDE COMPATIBILITY - Our mounting screws can be adjusted to fit different wall thicknesses up to 20mm (0.787 inches). In addition, our low voltage ring is also compatible with many different types of standard size panels, providing greater flexibility.
- WIDE APPLICATION - It is suitable for a variety of scenarios, including home networking, TV backplane wiring, home theater, office, etc. It can not only be used for low-voltage cable (such as speaker cables, coaxial cables, HDMI and data/communication cables) installation, but also can be used in combination with a variety of panels, such as HDMI, Ethernet, and brushes. It provides quality solutions under various wiring needs.
- PACKAGE CONTENTS - Includes 5 low voltage wall brackets and 10 Phillips screws. We provide 24 hours customer service and 18 months warranty.
Peesin 2 Pack Ceiling Light Fixture Mounting Bracket, 4 Inches Diameter Universal Light Crossbar, Steel Crossbar Plate With Ground Screw For Mount Wall Light









- Easy to Install - 4 Inches diameter universal mounting plate fits most ceiling lights. Including ground screws, wiring nuts and crossbar mounting screws, you just use it to mount light fixtures without buying other mounting hardware
- Wide Application - This light fixture mounting bracket adapter is designed to attach fixtures and canopies to electrical junction boxes. With lots of universal slots to allow different screws mounting and alignments , the light fixture mounting plate fits wall light, close to ceiling light, LED light, pendant light and chandelier, etc
- Quality and Safety - 2 pack universal circle crossbars are made of high quality zinc plated steel, sturdy, durable and anti-rust for a longer service life, reliable enough to ensure your safe use (MAX LOAD - 22LBS=10KG)
- Product Size - Dimensions for the holes are 2 1/8 inch center to center, 2 3/4 inch center to center, and 3 1/2 inch center to center. Made of zinc plated steel that is 0.56 inch thick and comes with an 8/32 ground screw
- Package Includes - 2 x light fixture mounting plates; 4 x crossbar mounting screws; 2 x ground screws; 6 x wiring nuts. If there is any questions when you install or using the universal light crossbar, please feel free to contact us
- Universal Steel Bracket Plate
Ticonn TICONN-1092-JB102T Waterproof Electrical Junction Box Ip67 Abs Plastic Enclosure With Hinged Cover With Mounting Plate







- PREMIUM QUALITY - TICONN electrical waterproof box is made from quality ABS plastic, which offers superb impact resistance and electrical insulation capability. Easy-to-operate door latches are made from 304 Stainless Steel
- IP67 GRADE - The electrical box offers complete protection against water and liquids, up to and including immersion in up to one meter of water. Great for high humidity environment.
- EASY TO MOUNT - The outdoor electrical box weatherproof comes with grid mounting plates that allow you to mount your board or device in the waterproof plastic box easily. A 3/8 inch NPT and a 1/2 inch NPT cable gland are included in case you need to feed wires outside. 4 stainless steel mounting brackets can be used to hang the box on walls or fences.
- WIDE APPLICATIONS - We offer multiple sizes of weatherproof electrical boxes to meet your needs. Great for sprinkler control, lighting control, and other smart home DIY projects.
- TICONN BRAND QUALITY COMMITMENT - We stand behind the quality of our products. If for any reason you are not satisfied with your purchase, please contact us. We provide 30-day money back and lifetime warranty. 100% Satisfaction Guarantee for risk-free shopping!
Imbaprice LV1-2PK Single Gang (1-Gang) Low Voltage Mounting Bracket





Qilipsu QL-302017AGH-N Hinged Cover Stainless Steel Latch 300X200X170Mm Junction Box With Mounting Plate, Universal Ip67 Project Box Waterproof Diy Electrical Enclosure









- IP67 RATED WATERPROOF - QILIPSU electrical enclosure boxes feature an IP67 waterproof and weatherproof design, they offer superior protection against water, rain, dust, snow, oil, UV rays, and other environmental elements. The robust design of the outdoor electrical box makes it ideal for use in both indoor and outdoor settings, ensuring that your electrical equipment is protected from harsh conditions.
- SUPERIOR DURABILITY - Our outdoor junction boxes are crafted from premium ABS material, providing exceptional resistance against impact and ensuring excellent electrical insulation. They are perfect for your various electrical projects, be it residential, commercial, or industrial, offering versatility, reliability, and efficiency.
- ELEVATE YOUR TALENT - Maximize your business and DIY potential with QILIPSU's versatile, drillable waterproof junction boxes. They are preferred for a wide range of applications including lighting systems, solar panel systems, irrigation controls, ham radio equipments, power supply, CCTV camera, starlink devices, routers, network, LEDs and various other applications. This long-lasting ABS plastic outdoor wifi enclosure also excels in outdoor environments with well Wi-Fi signal reception. Its your essential tool for innovative and seamless projects.
- EASY INSTALLATION - Enjoy hassle-free setup with the included mounting plate, it designed to accommodate a wide range of equipment with ease, saving you valuable time and effort. Furthermore, the four included 304 stainless steel brackets provide versatility and stability for convenient wall mounting.
- DIMENSIONS - The EXTERNAL size is 11.8 inchx7.9 inchx6.7 inch (300x200x170mm) for the weatherproof box. The INTERNAL size can be found in the dimension drawing. Ensure a perfect fit - Please double-check dimensions before purchasing to ensure a seamless match that saves you time and costs. If you have any doubts about the dimensions, please don't hesitate to contact us.
- CONVENIENT ACCESS - Our project boxes with a simple hinged cover that opens and closes easily, with 304 stainless steel latches that provide a reliable and watertight seal, making it convenient for maintenance and operation.
- QILIPSU UNIQUE SERVICE - At QILIPSU, we're more than just a brand, we're a community that puts your satisfaction at the heart of everything we do. We understand that perfect experiences are crafted with care, so we offer an exceptional extended after-sale service for effortless returns, even beyond Amazon's return window. Please dont hesitate to contact us if you have any issues. Our dedicated after-sale team is here to turn every concern into comfort, ensuring your journey with us is nothing short of perfect. Your voice helps us grow and refine, guiding us to serve you better.
- WHY CHOOSE QILIPSU - We're exclusively focused on industrial products, bringing electrifying expertise to your projects. While words can easily be duplicated, true excellence shines through in comparison. Guided by the invaluable insights from our valued customers, we commit to thinking differently, redefining standards of quality and service. Try QILIPSU, you're choosing more than a provider; you're gaining a partner committed to enhancing your efficiency and reducing costs.
Gratury Junction Box, Ip67 Waterproof Plastic Enclosure For Electrical Project, Hinged Grey Cover, Includes Mounting Plate And Wall Bracket 220×170×110Mm






- Weatherproof & waterproof designed enclosure box, suitable for harsh outdoor environments or indoor industrial applications
- Includes a mounting panel for easy installing PCB board, terminal or any other electrical components which need to be fixed on
- Simple hinged cover, easy open and close, stainless steel latches can keep a good watertight
- High-grade ABS material, lightweight and sturdy, cable outlets can be easily drilled
- Safety lockable design to prevent un-authorized openings
Imbaprice IMBA-8141DBL-BK-1 8141Dbl-2 White Outdoor Light Mounting Block With Built-In Electrical Box, Siding Mounting Plate



- Kit includes mounting block with built-in electrical box, NM cable connector, and 4 screws. UV rated plastic for long outdoor life. This Light Fixture Siding Mounting Kit
- Built-in electrical box design ensures compliance safety installation. Fast and easy to install after siding is up. extured, this siding mounting block is in white and surface upgrade can be painted to match the color of the vinyl siding or light. paintable surface.
- Flat Surface Mounting; 1/2 Inch Double Lap; 6.8 Cu Inch; Size 6.9 Inch W X 10.2 Inch H. For 1/2 inch lap siding double 4". 6.9 x 10.2 mounting surface.
- For 4-INCH SIDING, 1/2 inch Lap Double, provides for a smooth, vertical mounting of light fixtures on all siding types. Run wires through center punch hole. Safer to have your wires in a box.
- The mounting block allows mounting light fixtures on all siding types including T-111, HardiePlank lap siding, and flat surfaces. This product can be installed before or after the siding is installed, Mounts light fixtures on all siding types, including T-111, HardiePlank Lap Siding, and flat surfaces.
Loqjss 17167804052042 Waterproof Junction Box,6X6 Inch Outdoor Electrical Box,Junction Box With Mounting Plate,Electrical Box Waterproof Ip66







- PACKAGE CONTENT - You will receive 1pc outdoor electrical box, 1pc bottom plate, 4pcs hanging plates, 4pcs mounting screws, 2pcs black NPT1/2inch connector and 1pc waterproof liquid-tight conduit connector 1/2 inch. Two installation methods for convenience.
- IP66 RATED WATERPROOF - The electrical enclosure box features an IP67 waterproof and weatherproof design, offering superior protection against water, rain, dust, snow, oil, UV rays, and other environmental elements. Ideal for use in both indoor and outdoor settings.
- EASY TO USE - The hinge design makes it easier to open and close the box. The outdoor waterproof electrical box has a PC base plate to facilitate the installation of different electrical products. Can support the use of padlocks to add extra security and prevent theft.
- WIDE APPLICATION - Waterproof electrical box is easy to install and great for a variety of indoor or outdoor wiring solutions for electronics, power supplies, electrical equipment, lighting fixtures, home DIY projects, marine and more.
- DURABLE MATERIAL - The electrical box is made of ABS engineering plastic with stainless steel buckles, which is resistant to pressure and falling, impact resistant, anti-UV, strong insulation, high and low temperature resistance, and can be used for a long time.
Lemotech LMUS-PLATE-150150-2P 2Pc Mounting Plate For Junction Box, Abs Plastic Internal Panel W/Screws For Installation On Electrical Box






- Internal mounting plate main for hinged cover junction box seriesstainless steel latch electrical box 5.9"x5.9"x3.5"; abs plastic latch electrical box 5.9"x5.9"x3.5".
- Material - ABS plastic
- Plate size(L*W) - 4.8 inchx4.8 inch
- Package info - Plate*2; M4*8 Screws*8
- Easy to secure and organize the internal components of the junction box, such as terminals, switches, or receptacles ensuring they are properly installed and maintained within the box.
Ordentlich 520 Waterproof Electrical Junction Box Ip67 Abs Plastic Enclosure With Hinged Cover With Mounting Plate






- Weatherproof & waterproof designed enclosure box, suitable for harsh outdoor environments or indoor industrial applications
- Includes a mounting panel for easy installing PCB board, terminal or any other electrical components which need to be fixed on
- Simple hinged cover, easy open and close, stainless steel latches can keep a good watertight
- High-grade ABS material, lightweight and sturdy, cable outlets can be easily drilled
- Safety lockable design to prevent un-authorized openings
Cmple 1081-527-N Low Voltage Mounting Bracket 1 Gang Multipurpose Drywall Mounting Wall Plate Bracket Single Gang







- SINGLE-GANG Low Voltage Backless Old Work Bracket- Designed for low-voltage devices in an existing wall
- EASY TO INSTALL - Fully adjustable, ideal solution for mounting low voltage wires (phone, internet, TV, video)
- ADJUSTS TO FIT various wall thickness, the bracket wings secure when mounting screws are tightened
- PVC CONSTRUCTION for durable performance. Installs vertically or horizontally. Lifetime Warranty
- PACKAGE INCLUDE - 1 x Single Gang Low Voltage Bracket, Mounting Screws Included
Otdorpatio 018CC7 Junction Box, Hinged Clear Cover Stainless Steel Latch Ip67 Waterproof Abs Project Box With 2 Cable Glands,Electrical Box Enclosure With Mounting Plate & Wall Bracket 8.7X6.7X4.3Inch







- IP67 Grade - High quality black rubber sealing gasket, IP 67 Waterproof grade, effectively block splashing water, rain, dust, snow, oil, UV, etc., can be widely used for both indoor and outdoor applications.
- Super Durable - Our junction boxes are made of high-quality ABS material which offers outstanding impact resistant and electrical insulation, keep your equipment well-protected in harsh environments
- Stainless Steel Lacthes - Our waterproof junction box uses stainless steel buckles, which are more solid and durable, easy to open and close, doesn't rust or broken.
- Money Saving Junction Box Sets - The junction box includes a mounting plate, 4 stainless steel Wall Brackets, and 2 cable glands.The ABS project boxes can be drilled and shaped easily without cracking, so its almost suitable for your all DIY projects.
- EXTERNAL SIZE - 8.7"x6.7"x4.3"/220x170x110mm (L*W*H) for more size details, please refer to the dimension drawing. Allowable error=2mm
Qilipsu Junction Box With Mounting Plate 110X80X70Mm, Clear Cover Plastic Diy Electrical Project Case Ip67 Waterproof Dustproof Enclosure Grey






- ALL-IN-ONE SOLUTION - QILIPSU junction boxes comes with a mounting plate that allows for a seamless and cost-effective installation. This all-in-one solution eliminates hidden costs and simplifies the setup process, making it quick, safe, and efficient. It is perfect for both professionals and DIYers who are looking for quality and convenience in one product.
- SUPERIOR DURABILITY - Our outdoor project boxes are made of premium ABS material, providing exceptional resistance against impact and ensuring excellent electrical insulation.
- IP67 RATED WATERPROOF - The electrical enclosure boxes feature an IP67 waterproof and weatherproof design, they offer superior protection against water, rain, dust, snow, oil, UV rays, and other environmental elements. This robust design makes it ideal for use in both indoor and outdoor settings, ensuring that your electrical equipment is protected from harsh conditions.
- ELEVATE YOUR TALENT - Maximize your business and DIY potential with QILIPSU's versatile, drillable waterproof junction box. It's ideal for a wide range of applications including lighting systems, solar panel systems, irrigation controls, ham radio equipments, CCTV camera, starlink devices, routers, and various other applications. This long-lasting ABS plastic enclosure also excels in outdoor environments with well Wi-Fi signal reception. Its your essential tool for innovative and seamless projects.
- DIMENSIONS - The EXTERNAL size is 4.3 inchx3.1 inchx2.8 inch (110x80x70mm) for the weatherproof box. The INTERNAL size can be found in the dimension drawing. Ensure a perfect fit - Please double-check dimensions before purchasing to ensure a seamless match that saves you time and costs. If you have any doubts about the dimensions, please don't hesitate to contact us.
- QILIPSU UNIQUE SERVICE - At QILIPSU, we're more than just a brand, we're a community that puts your satisfaction at the heart of everything we do. We understand that perfect experiences are crafted with care, so we offer an exceptional extended after-sale service for effortless returns, even beyond Amazon's return window. Please dont hesitate to contact us if you have any issues. Our dedicated after-sale team is here to turn every concern into comfort, ensuring your journey with us is nothing short of perfect. Your voice helps us grow and refine, guiding us to serve you better.
- WHY CHOOSE QILIPSU - We're exclusively focused on industrial products, bringing electrifying expertise to your projects. While words can easily be duplicated, true excellence shines through in comparison. Guided by the invaluable insights from our valued customers, we commit to thinking differently, redefining standards of quality and service. Try QILIPSU, you're choosing more than a provider; you're gaining a partner committed to enhancing your efficiency and reducing costs.
Joisyoya SLPDX-TM-5.9×5.9×3.5 Waterproof Electrical Box Outdoor, Ip67 Abs Plastic Weatherproof Junction Box Enclosure With Aluminum Din Rail, Mounting Plate






- ABS & Stainless Steel - Joisyoya clear outdoor electrical box is crafted from quality PC/ABS material, and with easy-to-operate 304 stainless steel latches and wall mount brackets. Provides superb shock resistance and electrical insulation. Its clear cover design enables you to conveniently check on the equipment inside without the need to frequently open the box
- IP67 WATERPROOF - IP67 waterproof and weatherproof electrical junction enclosure box, it offers superior protection against water, rain, dust, snow, oil, UV rays, and other environmental elements. The robust design of the outdoor electrical box makes it ideal for use in both indoor and outdoor settings, ensuring that your electrical equipment is protected from harsh conditions
- Choose Your Need Size - The weatherproof junction box of EXTERNAL size is 5.9"x 5.9"x 3.5", INTERNAL size - 5.1"x 5.1 inch x 2.9", you also can be found in the dimension drawing. Ensure a perfect fit - Double check the dimensions before purchasing to ensure a seamless fit that saves you time and cost. Please do not hesitate to contact us via Amazon message if you have any questions
- Develop Your Imagination - Our electrical enclosure boxes include a pre-installed mounting plate x1, aluminum DIN rail x1, NPT3/8 "cable glands x 2, and some mounting screws and other accessories that make it easy to mount your electrical devices inside. It's your go-to tool for customizing, drilling and modifying DIY innovations and seamless projects
- Wide Application - This long-lasting ABS alloy plastic outdoor wifi enclosure also excels in outdoor environments with well Wi-Fi signal reception. We offer weatherproof electrical junction boxes in multiple sizes to meet your needs. Great for solar panel systems, lighting controls, and other smart home DIY projects
Totufy PDX-10X8X6 Steel Electrical Box 10'' X 8'' X 6'', Metal Outdoor Electrical Enclosure Box, Ip66 Waterproof Wall Mounted Eletrical Box With Safety Locks And Mounting Plate









- Sturdy Steel Construction - The electrical box enclosure adopts cold-rolled carbon steel made by precise cutting and welding. The epoxy-polyester powder coating with stronger wear resistance and can prevent rain erosion, keeping your equipment well-protected in harsh environments
- Waterproof Sealing Strip - The door frame of the electrical box adopts a groove waterproof design, with sealed rubber strips, which has a strong waterproof and dustproof effect and protects internal electrical safety. When it rains, it will flow down the groove to both sides and will not flow into the box. TIPS - just the ability to mount the door on the left side of the enclosure.
- Reinforced Lock & Hinge - The junction enclosure box is designed with a high-strength hinge cover, and a safety lock cylinder is added to increase security and lockability. effectively preventing others from opening the electrical box by mistake, protecting electrical equipment and personal safety
- EASY TO INSTALL - The waterproof electrical junction box is equipped with 2 Keys, 1 mounting plate(It has been assembled in the box), 1 set of Wall mounting pendants, and 1 bottom sealing plate that can quickly fix the electrical junction box to the wall, easy to hang. If the door panel does not close tightly, please press the latch firmly until the door panel locks tightly
- Extensive Application & SERVICE - Please dont hesitate to contact us through Amazon message if you have any questions. TOTUFY electrical box is suitable for indoor and outdoor applications to protect circuits and prevent corrosion. Such as factories, construction sites, malls, squares, residential areas, courtyards, etc.