Bulvack ZT001 10 Pack Lm2596 Dc-Dc Buck Converter Step Down Module Power Supply Dip Output 1.25V-30V 3A







- Input voltage range - DC 3.2V to 35V (input voltage must be higher than the voltage output to 1.5V or more can not be boosted.)
- Output - 1.25V to 30V DC voltage is continuously adjustable, high efficiency and maximum output current of 3A.
- All solid capacitors using SANYO
- 36u thick circuit boards
- High-Q inductors with high power output LED indicator
Aitrip LM2596 Dc To Dc Buck Converter 3.0-40V To 1.5-35V Power Supply Step Down Module







- Input - DC 3 V to 40 V (input voltage must be 1.5 V higher than the output voltage, no boost)
- Output - DC 1.5 V to 35 V voltage is continuously adjustable, maximum output current is 3 A
- Steps - connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed voltage (The factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down)
- Features - all use SANYO solid-state capacitors, 36 u thickening circuit boards, high-Q inductance with LED indicator output
- Quantity - 5 pieces; Size - 45 * 20 * 14 mm
Frienda FRIENDA-POWER CONVERTERS-01 4 Pieces Adjustable Lm2596S Dc-Dc Buck Converter Reduced Voltage Regulator Power Module 36V 24V 12V To 5V 2A Voltage Stabilizer







- Product parameters - input voltage is 4.0V - 40V, output voltage is 1.25V - 37V, output current is 2A (normal and stable) and 3A max, conversion efficiency 92% (highest), output ripple under 30mV, switching frequency 150KHz, operating temperature is -45 to 85 degree Celsius
- Simple to operate - the voltmeter can be turned off, and the switch can be turned off by pressing and holding the switch for more than 1 second and less than 4 seconds, once the voltmeter is turned off, simply press the switch to turn on the voltmeter
- Easy to use - with terminal block, no soldering iron is also convenient to use, and retain the wire bond point (the input voltage must be higher than the voltage to be output by 1v or more)
- Output current - the maximum output current can be as high as 3A, the recommended working current is about 2A, more than 2A plus heat sink
- Nice design - with 150KHz internal oscillation frequency, features low power consumption and high efficiency; When the output voltage cannot be adjusted and is always equal to the input voltage, please turn the potentiometer counterclockwise for more than 10 turns, and then use the module to adjust the voltage normally; This is because when the module leaves the factory, the default output voltage is about 20V
Drok REES-1822 Dc Buck Converter, 5.3V-32V To 1.2V-32V 12A Adjustable Power Supply








- Parameter - DROK Power Supply Module input volt range is DC 5.3-32V; Output volt range is DC 1.2-32V which is variable. Output current can reach to 8A and Output Power can reach to 120W for long-time use. If enhance heat dissipation, this converter can reach 12A and 160W output.
- Characteristics - This Buck Converter is equipped with LCD Display, Acrylic Case and Heat Sink. LCD Screen can display input/output voltage, output current and output power. Voltage precision is 0.05V, current precision is 0.005A. Acrylic case can keep the converter board away from dust, which is protective. Heat Sink can keep module 120W for long-time using in a low temperature. If you want to reach maximum power 160W, please improve heat dissipation.
- Easy Operation - A user manual will be included in package, which can help you easier to operate. The button can control ouput voltage ON/OFF status, and you can set the default output state is ON/OFF for the next time. The potentiometer can help you to adjust volt amp in a simple and fast way.
- Protection - It has reverse-connect protection, short circuit protection and over current protection. When you connect the input wire reversely or short circuit, the module will not burn. And roate the CC potentiometer to set over current protection value you want.
- Application - The volt conversion board can be used for 5v 6v 9v 12v 24V 30V 32V 3a 5a 10a devices, like solar panel, lab, experiment, RV, All-Terrain Vehicle, car, battery charger, LED stripes, etc.
Jtarea LM-MODUE-2PCS Lm2596 Lm2596S Dc-Dc Buck Converter Voltage Regulator Adjustable Dc To Dc 4.0-40V To 1.25-37V 2A Power Supply Module





- JTAREA LM2596 Adjustable Buck Converter DC-DC - Measure More Accurate Voltage.
- INPUT VOLTAGE - DC 4.0~40V; PEAK CURRENT - 3 Amp
- VOLTAGE CHARACTERISTICS - Adjustable output voltage range, continuously adjustable between 1.25V~37V.
- EXCELLENT FEATURES - Voltmeter display - Self-calibration - No need to use a soldering iron.
- PACKAGE - Use a static bag - for protection and packaged in a box - for easy storage.
Eboot EBOOT-POWER-CONVERTERS-01 Mini Mp1584En Dc-Dc Buck Converter Adjustable Power Module 24V To 12V 9V 5V 3V









- Mini MP1584EN DC to DC buck converter module with a wide operating range
- Input voltage - 4.5 V to 28 V; Output voltage - 0.8 V to 20 V
- Output current - 3 A (maximum); Conversion efficiency - 92% (maximum)
- Output ripple - less than 30 mV; Switching frequency - 1.5 MHz (highest), typically 1 MHz
- Operating temperature - -45 to 85 ; Size - 22 mm by 17 mm by 4 mm; Warning - do not reverse the positive and negative terminals to avoid any possible damage; Do not use light load (less than 10% of output power) or without load
Dorhea D13539-1 5Pcs Lm2596S Dc-Dc Lm2596 With Led Display Voltmeter Buck Converter Step-Down Regulator 4.0-40V To 1.25-37V Dc 36V To 24V To 12V To 5V Power Supply Module Compatible






- LM2596 buck converter stably output, voltage conversion efficiency is up to 96%. The output voltage is 1.25V-37V (continuously adjustable, the input voltage must be 1V higher than the output voltage),the output current is 2A (normal and stable), the maximum is 3A.
- The digital can be turn on or off, to show input or output voltage. With advanced voltage microprocessor, self calibration, the voltmeter error0.1V, the input voltage is DC 0~40V, (Note - To ensure the accuracy of the voltmeter, please ensure that the input voltage is above 4V).
- NOTE - This is a buck module. The input and output connectors cannot be reversed. The input voltage must be higher than the output voltage. A radiator is required for long-term work above 2A/15W. When using it for the first time, it is necessary to turn the potentiometer counterclockwise more than 10 times.
- Press the button next to voltmeter to test input voltage or output voltage. Green LED lights on when testing output voltage; red LED lights on when testing input voltage.Press the button for 1 to 4 seconds, voltmeter would be shut off when releasing your hands; the voltmeter is very accurate.
- Analog control - using a mini screwdriver to increase or decrease output voltage by adjusting the screw, clockwise to step up voltage and counterclockwise to step down voltage.
Dkplnt [8-Pack] Lm2596 Dc-Dc Adjustable Buck Converter 3-40 V To 1.5-35V Step Down Power Supply High Efficiency Voltage Regulator Module …
![Dkplnt [8-Pack] Lm2596 Dc-Dc Adjustable Buck Converter 3-40 V To 1.5-35V Step Down Power Supply High Efficiency Voltage Regulator Module … cover](https://m.media-amazon.com/images/I/51wg4xQAatL._SL500_.jpg)
![Dkplnt [8-Pack] Lm2596 Dc-Dc Adjustable Buck Converter 3-40 V To 1.5-35V Step Down Power Supply High Efficiency Voltage Regulator Module … thumb #1](https://m.media-amazon.com/images/I/41AOa1e-J9L._SL500_.jpg)
![Dkplnt [8-Pack] Lm2596 Dc-Dc Adjustable Buck Converter 3-40 V To 1.5-35V Step Down Power Supply High Efficiency Voltage Regulator Module … thumb #2](https://m.media-amazon.com/images/I/41vgcb7cnyL._SL500_.jpg)
![Dkplnt [8-Pack] Lm2596 Dc-Dc Adjustable Buck Converter 3-40 V To 1.5-35V Step Down Power Supply High Efficiency Voltage Regulator Module … thumb #3](https://m.media-amazon.com/images/I/41vZPl2Y-5L._SL500_.jpg)
- Input voltage range DC 3 - 40 V (input voltage must be 1.5 V higher than the output voltage, no boost)
- Output voltage rangeOutput - DC 1.5 - 35 V voltage is continuously adjustable, maximum output current is 3 A
- 8 pieces of LM2596 board
- Easy to make it work and convenient to accurately adjust the output voltage with a mini screwdriver.
- 100% SATISFICATION SERVICE - If there are any problem with our products, please feel free to contact us. you can request a refund for any single module and no need to return it.; Any problems you can contact us and we will try our best to resolve it till you satisfied.NoteThe factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down)
Bulvack 20 Packlm2596 Dc-Dc Buck Converter Power Converter







- Output Voltage Range - DC 1.5V to 35V continuously adjustable voltage, high efficiency output current is 3A.
Generic NA 5Pack Lm2596 Lm2596S Dc-Dc Step Down Variable Volt Regulator Input 3.0-40V Output 1.5-35V Adjustable Buck Converter Electronic Voltage Stabilizer Power Supply Module




- Input DC 3-40 V (input voltage must be 1.5 V higher than the output voltage, no boost).
- Output - DC 1.5-35 V voltage is continuously adjustable, maximum output current is 3 A.
- Easy work - convenient to accurately adjust the output voltage with a mini screwdriver.
- Features - Thickened circuit boards,Short circuit and over-temperature protection.
- Application - widely used for DIY mobile power, monitor power supply, power buggies,communications equipment supply,etc.
Eplzon EP-LM-2596S Lm2596S Buck Converter Buck Module Dc-Dc 3.2-35V To 1.25-30V 3A Voltage Adjustable Buck Converter Module





- All use SANYO solid-state capacitors, 36u thick circuit board, high-Q value and high-power inductor with output LED indicator lights
- Product parameters - The input voltage is DC 3.2-35V, the output voltage is 1.25V-30V (continuously adjustable, the input voltage must be 1.5V higher than the output voltage), the maximum output current is 3A, the conversion efficiency is 92% (maximum), the output ripple is less than 30mV, the switching frequency is 65KHz, and the working temperature is -45C to 85C.
- Note - This is a voltage reduction module. The input and output connectors cannot be reversed. The input voltage must be higher than the output voltage. It is recommended to use a current of less than 2.5A for long-term work. If it exceeds 2A, a heat sink (output of over 10W) should be added. When using it for the first time, the potentiometer must be turned counterclockwise at least 10 times.
- IN+input positive pole, IN - input negative pole; OUT+output positive pole, OUT - output negative pole, please note that the input and output cannot be reversed, as it may burn out if reversed!
- Application - The LM2596 step-down converter can be used in fields where the input voltage is higher than the step-down output voltage, such as batteries, power transformers, vehicle mounted voltage stabilizers, and system operating voltage testing
Hiletgo 3-01-0167 2Pcs Lm2596 Adjustable Dc-Dc Step Down Buck Power Convert Module 4.0-40V Input To 1.25-37V Output




- LM2596 DC-DC Buck Step-down Power Converter Module
- 4.0-40V to 1.25-37V LED Voltmeter
- output voltage range of 1.25V ~ 37V
Wwzmdib Constant Current Cc Cv Buck Converter Module Dc 6-40V To 1.2-36V 20A 300W Adjustable Step Down Voltage Regulator Power Supply Module With Short Circuit Protection Function






- Application - Motors, audio, monitor, LED car display, air conditioner, fans, solar energy, photovoltaic energy, DVD, LED lights, pumps, industrial equipment appliances, etc.
- wide input voltage range from 6V to 40V, the step-down converter can accurately adjust output voltage and current. The efficiency can be up to 95%,(measured at 20A, converting 24V to 12V).
- Short Circuit Protection - Self-recovery(cannot short circuit for long time). Plus, when input and output is common grounded, no-load CV output constant voltage,CC output constant current
- Adopting 75V / 80A large current dual MOS tube designed step-down board, Input and output use high frequency low resistance electrolytic capacitor, low ripple, and gives a stable output. Large current 30A connection screw terminals, more convenient to install
Dkplnt D-Planet [4-Pack] 5A Dc-Dc Adjustable Buck Converter 4
![Dkplnt D-Planet [4-Pack] 5A Dc-Dc Adjustable Buck Converter 4 cover](https://m.media-amazon.com/images/I/513bL87+o9L._SL500_.jpg)
![Dkplnt D-Planet [4-Pack] 5A Dc-Dc Adjustable Buck Converter 4 thumb #1](https://m.media-amazon.com/images/I/41LYVxd9tuL._SL500_.jpg)
![Dkplnt D-Planet [4-Pack] 5A Dc-Dc Adjustable Buck Converter 4 thumb #2](https://m.media-amazon.com/images/I/41-wHlYenfL._SL500_.jpg)
![Dkplnt D-Planet [4-Pack] 5A Dc-Dc Adjustable Buck Converter 4 thumb #3](https://m.media-amazon.com/images/I/41L-8JDuD6L._SL500_.jpg)
- Input voltage range438V (Note - input voltage not over 38V)
- Output voltage range1.25-36VDC adjustable.Output current - 0-5A,Output power - 75W
- High conversion efficiency up to 96%
- Updated Version - updated from LM2596 and better than it, with reverse voltage protection, over-temperature and short-circuit protection, thus making it much safer to use
- 100% SATISFICATION SERVICE - If there are any problem with our products, please feel free to contact us. you can request a refund for any single module and no need to return it.; Any problems you can contact us and we will try our best to resolve it till you satisfied.
Valefod VA-0189 [2 Pack] Dc-Dc 5A Buck Converter 4-38V To 1.25-36V Step-Down Voltage Regulator High Power Module
![Valefod VA-0189 [2 Pack] Dc-Dc 5A Buck Converter 4-38V To 1.25-36V Step-Down Voltage Regulator High Power Module cover](https://m.media-amazon.com/images/I/51wsSDUnXgL._SL500_.jpg)
![Valefod VA-0189 [2 Pack] Dc-Dc 5A Buck Converter 4-38V To 1.25-36V Step-Down Voltage Regulator High Power Module thumb #1](https://m.media-amazon.com/images/I/51jF5E6851L._SL500_.jpg)
![Valefod VA-0189 [2 Pack] Dc-Dc 5A Buck Converter 4-38V To 1.25-36V Step-Down Voltage Regulator High Power Module thumb #2](https://m.media-amazon.com/images/I/51PD1K96W7L._SL500_.jpg)
![Valefod VA-0189 [2 Pack] Dc-Dc 5A Buck Converter 4-38V To 1.25-36V Step-Down Voltage Regulator High Power Module thumb #3](https://m.media-amazon.com/images/I/51uQAjvB8KL._SL500_.jpg)
![Valefod VA-0189 [2 Pack] Dc-Dc 5A Buck Converter 4-38V To 1.25-36V Step-Down Voltage Regulator High Power Module thumb #4](https://m.media-amazon.com/images/I/41DvKhcFiqL._SL500_.jpg)
![Valefod VA-0189 [2 Pack] Dc-Dc 5A Buck Converter 4-38V To 1.25-36V Step-Down Voltage Regulator High Power Module thumb #5](https://m.media-amazon.com/images/I/41L0RFsj2JL._SL500_.jpg)
![Valefod VA-0189 [2 Pack] Dc-Dc 5A Buck Converter 4-38V To 1.25-36V Step-Down Voltage Regulator High Power Module thumb #6](https://m.media-amazon.com/images/I/41mIFAj1deL._SL500_.jpg)
- High Precision - The buck converter consists of 36u thickened circuit boards, high-Q inductance with output LED indicator, and superior solid-state capacitors that can effectively filter out high frequency noise. Suitable for various electronic projects.
- Input Voltage - DC 4V to 38V (input voltage must be 1.5V higher than the output voltage, no boost).
- Output Voltage - DC 1.25V to 36V voltage is continuously adjustable, maximum output current is 5A.
- Mini Size - 62*38*14 mm (with potentiometer). 2 sets included.
- Easy to DIY - Connect to power source, using a mini screwdriver to increase or decrease output voltage by adjusting the screw on the blue potentiometer and monitor voltage with multimeter to get the needed voltage, clockwise to step up voltage and counterclockwise to step-down voltage. (Factory default stays a high voltage, you need to contrarotate about 7-15 circles before the voltage starts ramping down, 1 circle means +/- 1V)
Drok 180080AFA Dc Buck Module, Adjustable Buck Converter Step Down Voltage Regulator 6V-32V 30V 24V 12V To 1.5-32V 5V 5A Lcd Power Supply Volt Reducer Transformer Module Board








- PARAMETER - - Input voltage range DC 6V-32V; Output voltage DC 1.5V-32V; Max output current 5A, recommend use of within 4.5A; Max output power 75W, recommend use of within 50W.
- GENERAL USE - - As ordinary step-down module with over-current protection; As constant current LED driver module; DIY a solar power controller, etc.
- DISPLAY - - Large clear digital LCD display voltage & current value simultaneously.
- FEATURES - - Constant current/voltage mode; Voltage calibration & current calibration; USB interface; Protective case; Short-circuit protection; Over-temperature protection; Input reverse connection protection.
- NOTE - - 1). Output voltage is set as around 20V by default, if your input is lower than that, please turn potentiometer anticlockwise for 10 laps or more until voltage changes. 2). The case is packaged unassembled to avoid damage during transit. It needs to be manually installed. 3). Please carefully read the users manual, especially the Cautions before using. You can find the PDF Instructions on this page - Product information - Product guides and documents - User Manual PDF - .
Drok Dc Buck Converter, Stepdown Voltage Regulator 6-55V To 0-50V 8A 400W 6V 12V 24V 36V 48V Constant Voltage And Constant Current Buck Module







- Adjustable Voltage & Current - - Input Voltage is 6.0-55V; Output Voltage is 0.0-50V; Output Current is 0.000A-8.100A; Output Power is 0-400W. It is not suitable for devices with a voltage higher than 50v or output current higher than 8A. It is a buck converter which can only converts a higher input voltage to a lower output voltage.
- Intelligent Cooling Fan - - when temperature is over 50 or current is over 2A, the fan will be activated automatically.
- Protection -- Hardware Protection - input anti reverse-connect protection and output short circuit protection. Software Protection - over voltage protection(OVP), over current protection(OCP), over power protection(OPP), over temperature protection(OTP), input low voltage protection(LVP).
- OAH/OPH/OHP Function - - when the recorded capacity/energy/operation time is higher than the setting maximum capacity/energy/time, the power supply will automatically turn off output, and "OAH"/"OPH"/"OHP" will flash on the screen.
- LCD Display - - the module status reader is designed with LCD screen, clear and convenient.
Stemedu ST0783X3 3Pcs Lm2596 Dc To Dc Buck Converter 4-40V To 1.25-37V Adjustable Voltage Regulator Step-Down Module






- High Precision - LM2596 DC-DC adjustable step-down module, with voltmeter display, voltmeter error 0.1V, measuring range 4~40V (When Input voltage lower than 4V, on-board voltmeter does not work and does not display)
- Input Voltage - The input voltage is 2.5V~40V, and the input voltage must be more than 1V higher than the output voltage
- Output Voltage - The output voltage is 1.25V~37V (adjustable); The maximum output current is 3A
- Features - This module has the advantages of low power consumption and high efficiency, and has the functions of overheating protection and short circuit protection. If it exceeds 15W, please strengthen heat dissipation.
- Widely Application - This voltage reduction module can be used in the voltage reduction field where the input voltage is higher than the output voltage, such as storage battery, power transformer, DIY adjustable voltage stabilizing power supply, 24V vehicle mounted pen and notebook power supply, industrial equipment voltage reduction, 12V to 3.3V, 12V to 5V, 24V to 5V, 24V to 12V, 36V to 24V, etc.
Aideepen A2_GXJA0015-002_US Dc-Dc Synchronous Buck Converter







- THX - Please don't miss a product worth buying. You will enjoy 7*24 hours after-sales service and professional product usage guidance. Your satisfaction is our motivation.
- Input voltage - 8-60V (Non isolated step-down module);Output voltage - 1-36V continuously adjustable (default output 12V)
- Output current - Normal 10A, maximum (MAX) 15A
- Such as long working hours, please note left margin and make the heat rise.
- Note - This power module belongs to a DC step-down switching power supply. The input voltage should always be greater than the output voltage and there should be at least 1V voltage difference. Input power=output power+loss (principle of energy conservation)
Drok 90010 Waterproof Dc Buck Converter Voltage Regulator 8-22V To 3-15V 5V 12V 3A Adjustable Output Power Supply Transformer Step-Down Volt Module Board







- Uses synchronous rectification technology, has high conversion efficiency and stable performance; The input should be at least 3V higher than output.
- With potentiometer on the bottom, which allows you adjust the accuracy with the mini screw, but ensures you won't easily change its setting when mounted.
- Fully sealed, outer enclosure acts as a heat sink, specially made to be waterproof, anti-shock, anti-humidity and dust-proof, more durable.
- With reversed-connection protection, over-current protection, over-heating protection and over-voltage protection, hence is safe to use.
- Perfect for electronic hobby project, wide application, you can use it on radio, Car Audio, LED display, motor, cell phone, etc.